Online Training Courses

  • Asbestos Awareness Online (Spanish)
  • Asbestos Awareness Online With Wallet ID Card (Spanish)
  • Confined Space Awareness Training
  • DOT Hazmat: Function Specific - Hazard Classes and Divisions
  • DOT Hazmat: Function Specific - Placarding
  • DOT Hazmat: Function Specific - Using the Hazmat Table (HMT)
  • Introduction to Job Hazard Analysis (JHA)
  • Lead Awareness for General Industry Online
  • Lead Awareness for General Industry Online
  • Lead Awareness for General Industry Online with Wallet ID
  • Lead Awareness for General Industry Online with Wallet ID
  • OSHA 10 Hour Construction Safety Online
  • OSHA 10 Hour General Industry Online
  • OSHA 24 Hour HAZWOPER - Online (Spanish)
  • OSHA 24 Hour HAZWOPER Online
  • OSHA 30 Hour Construction Safety Online
  • OSHA 40 Hour HAZWOPER - Blended
  • OSHA 40 Hour HAZWOPER - Online
  • OSHA 40 Hour HAZWOPER - Online (Spanish)
  • OSHA 8 Hour HAZWOPER Refresher
  • OSHA 8 Hour HAZWOPER Refresher (Spanish)
  • OSHA 8 Hour HAZWOPER Refresher with Wallet ID Card
  • OSHA 8 Hour HAZWOPER Refresher With Wallet ID Card (Spanish)
  • OSHA 8 Hour HAZWOPER Supervisor (Initial)
  • OSHA 8 Hour HAZWOPER Supervisor Refresher
  • OSHA 8 Hour HAZWOPER Supervisor Refresher with Wallet ID Card
  • OSHA Hazard Communication Training Aligned with GHS
  • OSHA Hazard Communication Training Aligned with GHS (Spanish)
  • OSHA Hazard Communication Training Aligned with GHS w/Wallet ID Card (Spanish)
  • OSHA Hazard Communication Training Aligned with GHS With Wallet ID Card
  • OSHA Hearing Conservation Training
  • OSHA Respiratory Protection Training
  • Package Deal Including both Online OSHA 8 Hour Refresher w/Wallet ID Card & the Online OSHA 8 Hour HAZWOPER Supervisor
  • Package Deal Including both the Online OSHA 24 Hour HAZWOPER & Online OSHA 8 Hour HAZWOPER Supervisor Initial
  • Package Deal Including both the Online OSHA 40 Hour HAZWOPER & Online OSHA 8 Hour HAZWOPER Supervisor Initial
  • Silica Awareness for Construction Online
  • Silica Awareness for Construction Online with Wallet ID Card
See All Online Courses

All Courses

OSHA 30hr Construction Outreach

This training course provides a comprehensive understanding of the most important occupational safety and health compliance issues in the construction industry. It provides an increased knowledge of the standards and regulations and offers insight into the more complicated and often confusing elements of the OSHA Act (CFR 1926). This is a 4 day course. $625.00 per student +++ 3 or more students: $600.00 per student

8hr Hazardous Waste Site Supervisor

This course is designed for individuals with previous 40 or 24 hour training who direct or are responsible for the activities of other individuals engaged in hazardous waste operations. $175.00 per student +++ 3 or more students: $150.00 per student

8hr Hazardous Waste Site Refresher

Those with prior 40 or 24 hour training are required to take a yearly refresher course to meet requirements of 29 CFR 1910.120. Participants will be provided updates on recent OSHA activities, enforcement directives and interpretations, health & safety procedures, and in hazardous waste operations. $175.00 per student +++ 3 or more students: $150.00 per student

OSHA 10hr Construction Outreach

This outreach-training program was designed by OSHA to provide important safety information to the construction industry, with the focus on the interpretation of the OSHA regulations. This course is taught by an OSHA certified instructor and is ideal for safety professionals who want a better knowledge of OSHA regulations. This is a 2 day course. $375.00 per student +++ 3 or more students: $350.00 per student

40hr Hazardous Waste Site Worker

This 4 day course is designed for engineers, drillers, environmental professionals, manufacturers, industrial hygienists, operators, contractors or anyone who directs or conducts hazardous waste investigations or remedial activities. Course meets the requirements of 29 CFR 1910.120. Participants will learn to apply the rules and regulations of OSHA and standard 29 CFR 1910.120, hazard recognition and evaluation, hazard control and worker protection and initial site investigation through field exercises. $675.00 per student +++ 3 or more students: $650.00 per student

Asbestos Awareness

The goal of this course is to improve the health and safety of employees by providing required training regarding the awareness of asbestos hazards.

Basic First Aid

Each employee will know how to initially respond to an accident or injury situation, become aware of first aid guidelines and "good practices," and be able to properly treat injuries and respond to emergencies.

Bloodborne Pathogens

The goal of this course is to help employers provide a safe and healthful work environment for their employees and minimize the possibility of employee exposure to bloodborne pathogens.

Cardiopulmonary Resuscitation (CPR)

This course provides refresher training or supplement training from a practical hands-on CPR course on how to respond confidently to a respiratory, cardiac or choking emergency until professional medical help arrives

Chemical Safety

This course provides required awareness training in occupational hazards common to the handling chemicals, methods used for evaluating and minimizing chemical exposure, measures that protect against chemical hazards, safe practices for chemical storage and waste disposal, and the correct response to emergency situations involving chemical spills.

Chlorine Safety

The goal of this course is to provide awareness training to help workers recognize the occupational hazards and health effects of chlorine exposure and the exposure controls.

Competent Persons in Excavations

This course is designed for participants to recognize the safety and health hazards associated with trenching and shoring. Topics include soil classifications, atmospheric hazards, safety practices, protective systems, and competent persons duties. $225.00 per student +++ 3 or more students: $200.00 per student

Competent Persons in Scaffolding

Scaffolding Employees working around scaffolds will be taught to recognize definitions and types of scaffolds, the potential hazards connected with their use, including electrical, structural instability, falls, and falling objects, and will demonstrate proper use of procedures required for working on or near scaffolds. $250.00 per student +++ 3 or more students: $225.00 per student

Compressed Gases

The goal of this course is to make employees aware of the safety requirements when working with or around Compressed Gas.

Confined Space Entry

This course is designed for participants to recognize the safety and health hazards associated with entering confined spaces. Course topics include all aspects of working in permit-required spaces, air monitoring, safety equipment , and personal protective equipment. $300.00 per student +++ 3 or more students: $250.00 per student

Crane and Rigging Safety

The goal of this course is that all employees operating bridge cranes will be able to identify the requirements for inspection, operational testing, proper rigging and lifting procedures, and other safety practices relevant to crane operation.

Electrical Safety

The goal of this course is to introduce employees to electrical hazards. It covers general electrical safety in the workplace including the proper use of portable electrical equipment such as appliances and tools, extension cords, and Ground Fault Circuit Interrupters (GFCI).

24 Hr Emergency Response

Each employee will recognize their employer's responsibilities for communicating the emergency action plan, list their responsibilities in the action plan, identify requirements for alarm systems, recognize the elements of the fire prevention plan, and state responsibilities for responding to weather-related disasters, natural disasters, bomb threats, fire, workplace violence, and hazardous material incidents. This is a 3 day course. $550.00 per student +++ 3 or more students: $500.00 per student

Environmental Management

Upon completion of this course, students will be able to identify waste management concepts, the hazards of environmental waste, the regulations in place to manage waste reduction and waste generation, and actions to take if a spill or release of hazardous material occurs.

Fall Protection

The goal of this course is to make employees aware of the requirements for use of Fall Protection, Work Positioning, Fall Restraint, and Fall Arrest systems.

Fire Safety

The goal of this course is to reduce the financial and personnel cost of fires.

Flammable Liquid Safety

This course covers the principles of hazard recognition, general safety requirements, flashpoint protection and inventory inspections in the use of flammable and combustible liquids in the workplace.

Forklift Operator Training

Training Learners will demonstrate awareness of safe forklift operation principles by identifying basic key features on the lift, recognizing the technical components of forklift operation, listing safe load handling and driving practices, stating general safety rules, and inspecting and maintaining lift equipment.

Hand Safety

This course is designed to identify the major types and causes of hand injuries and how to prevent them through awareness of hazards, the use of hand protective equipment, and effective safe working practices.

Hazard Communication

The goal of this course is to inform workers of their right to know about chemical hazards in their workplace and to meet OSHA requirements for providing employees information about the Hazard Communication Standard.

Industrial Ergonomics

This course is designed to minimize the possibility of employee accidents and illness due to chronic work-related physical and psychological stresses and maximize productivity and efficiency.

Laboratory Safety

The goal of this course is to provide required awareness training in the occupational hazards common to most laboratory operations, safe work practices to help reduce or eliminate exposure to these hazards, special equipment and precautions to ensure personal safety, and the correct response to emergency situations in laboratories.

Ladder Safety

Employees learn common hazards associated with ladder work and how to follow safe practices to reduce these hazards. Also learn the fall protection requirements associated with ladder work and when and how to inspect ladders.

Lead Awareness

This course provides awareness training to help workers recognize the occupational hazards and health effects of lead exposure, where lead is found, and the exposure controls.

Lockout/Tag Out

The goal of this course is to instruct workers to understand and comply with the OSHA lockout/ tag out standard.

Machine Guarding

This course covers the mechanical hazards associated with machinery use and the safeguarding requirements for those machines.

Office Ergonomics

This course is designed to minimize the possibility of employee accidents and illness due to chronic work-related physical and psychological stresses and maximize productivity and efficiency.

Personal Protective Equipment

The goal of this course is to teach the student how to determine what personal protective equipment is required to perform a particular job, to inspect this equipment for defects before donning it, and how to determine when this equipment needs to be replaced.

Process Safety Management

This course is designed to provide awareness training on "highly hazardous" chemical processes and the importance of having and following certain procedures to prevent or minimize the release of these chemicals.

Respiratory Protection

The goal of this course is to ensure users are qualified and properly trained in the use and maintenance of respirators.

Safety Audits

The goal of this course is to provide awareness training for managers, supervisors, and general employees on the importance of safety audits and how to plan and conduct an audit

Slips, Trips and Falls

The goal of this course is to teach employees to identify safe and correct methods for using portable ladders and scaffolds. The student learns to identify good housekeeping practices to prevent accidents, as well as safe procedures for working on elevated surfaces.

Traffic Control (Flagger)

The student will be taught to recognize general guidelines for traffic control, the signs, barriers, flags, stop/slow paddle and lights used at the work site, clothing regulations, and how to properly position himself/herself for optimum safety. The student will also identify how to judge traffic speed and congestion and regulate traffic accordingly.

Excavations

This course is designed for participants to recognize the safety and health hazards associated with trenching and shoring. Topics include soil classifications, atmospheric hazards, safety practices, protective systems, and competent persons duties.

Incident Commander

This course is designed for individuals with previous 40 or 24 hour training who direct or are responsible for the activities of other individuals engaged in hazardous waste operations. Additionally, the course is for those who develop and/or implement health & safety plans or who serve as project managers. $225.00 per student +++ 3 or more students: $200.00 per student

Scaffolding

Employees working around scaffolds will be taught to recognize definitions and types of scaffolds, the potential hazards connected with their use, including electrical, structural instability, falls, and falling objects, and will demonstrate proper use of procedures required for working on or near scaffolds.


jw Rufolo And Associates, Inc

1. Comply with Federal Occupational Safety and Health (OSHA) requirements

2. Help when OSHA Inspectors show up at your door

3. Provide Training through our comprehensive course schedule

4. Discover the extensive services that we provide